Anmol Chemicals is the pioneer manufacturers of Sodium formaldehyde bisulfite or Sodium hydroxymethanesulfonate, Pharmaceutical Excipients Fragrance & Flavor chemicals in India. We offer Halal and Kosher Sodium formaldehyde bisulfite made in an ISO9001:2008, ISO22000:2005 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Sodium hydroxymethanesulfonate is in these pages. The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal
Sodium hydroxymethanesulphonate Sodium formaldehyde bisulphite SDS GHS, MSDS Sheet
Specifications of Sodium hydroxymethanesulphonate Sodium formaldehyde bisulphite manufacturers
Sodium Formaldehyde Bisulfite SDS GHS, MSDS Sheet, Sodium Hydroxymethanesulfonate Material Safety Data Sheet
Section 1 - Chemical Product Identification
Name: Formaldehyde Sodium Bisulfite.
Synonym: Formaldehyde sodium bisulfite; Formbis; Monosodium hydroxymethanesulfonate; Sodium hydroxymethanesulfonate; Sodium hydroxymethylsulfonate
Molecular Formula: HOCH2SO3Na
Molecular Weight: 134.09
CAS #: 870-72-4
EINECS EC Number: 212-800-9
Recommended usage: Industrial Manufacturing.
Section 2 - Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC) or not covered by GHS:
May cause mild eye irritation.
May causes mild skin irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3 - Composition, Information on Ingredients
Chemical Name: Formaldehyde Sodium Bisulfite or Sodium Formaldehyde Bisulfite Sodium Hydroxymethanesulfonate
CAS #: 870-72-4
EINECS EC Number: 212-800-9
Section 4 - First Aid Measures
Eyes: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.
Skin: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Cold water may be used.
Ingestion: Do not induce vomiting. Get medical aid if irritation or symptoms occur.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically and supportively.
Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Flash Point: 184 deg C ( 363.20 deg F)
Auto ignition Temperature: 500 deg C ( 932.00 deg F)
Section 6 - Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according law.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Section 7 - Handling and Storage
Handling: Use Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage: Store in a cool, dry place. Store in a tightly closed container.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits: Formaldehyde Sodium Bisulfite or Sodium Hydroxymethane Sulfonate or Sodium Formaldehyde Bisulfite is not listed by ACGIH, NIOSH, OSHA - Final PELs
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - Physical and Chemical Properties
Physical State: Sodium Formaldehyde Bisulfite or Sodium Hydroxymethane Sulfonate is solid.
Odor: None reported.
pH: 7 - 8 (100g/L aq sol)
Freezing/Melting Point: 200 deg C (decom)
Decomposition Temperature: 200 deg C
Solubility: 800 g/L (20C)
Molecular Formula: CH3NaO4S
Molecular Weight: 134.08
Section 10 - Stability and Reactivity
Chemical Stability: Hygroscopic; absorbs moisture or water from the air.
Conditions to Avoid: Incompatible materials, dust generation, exposure to moist air or water.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - Toxicological Information
RTECS#: CAS# 870-72-4: PB2200000
LD50/LC50: CAS# 870-72-4 Oral, rat: LD50 = 3200
Carcinogenicity: CAS# 870-72-4: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Section 12 - Ecological Information
Ecotoxicity: No data available. No information available.
Environmental: No information available.
Section 13 - Disposal Considerations
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3.
RCRA P-Series: None listed.
RCRA U-Series: None listed.
Section 14 - Transport Information
DOT & ADR/IRD
Section 15 - Regulatory Information
TSCA: CAS# 870-72-4 is listed on the TSCA inventory.
Health & Safety Reporting List: None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules: None of the chemicals in this product are under a Chemical Test Rule.
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule: None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs: None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances: None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA: None of the chemicals in this product are considered highly hazardous by OSHA.
STATE: CAS# 870-72-4 is not present on state lists from CA, PA, MN, MA, FL, or NJ.
California Prop 65: California No Significant Risk Level: None of the chemicals in this product are listed.
WGK (Water Danger/Protection): CAS# 870-72-4: 1
European Labeling in Accordance with EC Directives.
EINECS EC Number: 212-800-9
Hazard Symbols: None.
Safety Phrases: S 24/25 Avoid contact with skin and eyes.
Canada - DSL/NDSL: CAS# 870-72-4 is listed on Canada's DSL List.
Canada - WHMIS: This product has a WHMIS classification of D2B.
Section 16 - Additional Information
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
Sodium hydroxymethanesulphonate Sodium formaldehyde bisulphite manufacturers:
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264
Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan,etc.
Copyright and Usual Disclaimer is Applicable. 16 March, 2016